Supported Call States Mibs - Cisco CTS-500 Configuration Manual

Configuration guide for the cisco telepresence system
Table of Contents

Advertisement

Supported Call States MIBs

CISCO-TELEPRESENCE-CALL-MIB::ctpcStatStartupAlarm.jitter.audio = INTEGER:
risingOrFallingAlarm(3)
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatMonitoredStatus.jitter.audio = INTEGER: active(1)
2008-08-19 21:31:58 <UNKNOWN> [UDP: [172.28.28.24]:32793]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (4431) 0:00:44.31
SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-TELEPRESENCE-CALL-MIB::ctpcStatNotificaion
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatEventMonObjectInst.1 = OID:
CISCO-TELEPRESENCE-CALL-MIB::ctpcAvgCallJitter.1.audio.priCodec
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatEventCrossedValue.1 = Opaque: UInt64: 3
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatEventCrossedType.1 = INTEGER: risingThreshold(1)
2008-08-19 21:32:38 <UNKNOWN> [UDP: [172.28.28.24]:32793]:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (8433) 0:01:24.33
SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-TELEPRESENCE-CALL-MIB::ctpcStatNotificaion
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatEventMonObjectInst.4 = OID:
CISCO-TELEPRESENCE-CALL-MIB::ctpcAvgCallJitter.1.audio.priCodec
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatEventCrossedValue.4 = Opaque: UInt64: 0
CISCO-TELEPRESENCE-CALL-MIB::ctpcStatEventCrossedType.4 = INTEGER: fallingThreshold(2)
Supported Call States MIBs
Table A-22
Table A-22
Supported Call States MIBs
MIB
ctpcStateCode
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
A-20
Appendix A
contains supported call states MIBs.
Type
unknown(1)
other(2)
noMgmtSysConn(3)
noDialTone(4)
invalidNumber(5)
ringing(6)
noAnswer(7)
inProgress(8)
remoteHold(9)
shareLineActive(10)
inLocalConference(11)
terminatedbyError(12)
localHold(13)
terminatedNormally(14)
answer(15)
resume(16)
MIBs, RFCs, and SNMP Trap Messages for the Cisco TelePresence System
OL-21851-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unified communications manager

Table of Contents