Cisco CTS-500 Configuration Manual page 72

Configuring the Cisco Unified IP Phone
Table 2-10
Field
Check-Box
Disable Speakerphone
Check-Box
Disable Speakerphone and
Headset
Forwarding Delay
PC Port
Settings Access
Gratuitous ARP
PC Voice VLAN Access
Video Capabilities
Auto Line Select
Web Access
Days Display Not Active
Display On Time
Display On Duration
Display Idle Timeout
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
2-12
Product Specific Configuration Layout Fields
Required?
—
—
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
—
—
—
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets
Setting
Leave the box checked (speakerphone disabled)
unless you are using the One Phone Per Office
feature.
Note The speakerphone must be enabled
(Disable Speakerphone box unchecked) to
initiate the One Phone Per Office feature.
See the "One Phone Per Office" section on
page 5-1.
Leave the box checked (speakerphone and headset
disabled) unless you are using the One Phone Per
Office feature.
Note The Auto Answer feature does not work if
the Disable Speakerphone and Headset box
is unchecked.
Disabled.
Choose Disabled.
Additional drop-down menu choice:
• Enabled—Use only to enable the
Per Office feature.
Note You must enable the PC port on the
Cisco Unified IP Phone for MIDlets and
the One Phone Per Office
function.
Enabled.
Disabled.
Enabled.
Disabled.
Disabled.
Choose one of the following:
Enabled
•
• Disabled
If you are using Cisco Unified CM
Note
firmware release 8.0 and wish to enable
MIDlets features on new phone
installations, you must first enable this field
to use Cisco WebEx.
Choose a day of the week.
Leave the default setting.
Leave the default setting.
Leave the default setting.
One Phone
feature to
OL-21851-01