Secure Shell Information - Cisco CTS-500 Configuration Manual

Configuring a Cisco TelePresence Device

Secure Shell Information

Figure 1-4
Figure 1-4
Using the information in
that will be used to access the command line interface (CLI) and the Cisco TelePresence Web
Administration interface. Click Save to save your settings.
Table 1-8 Cisco TelePresence Secure Shell Settings
Field
Secure Shell Admin User
Secure Shell Admin Password
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
1-20
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
shows the Secure Shell (SSH) Information window.
SSH Information Window
Table 1-8 as a guide, provide a username and password for the SSH account
Required? Setting
Yes Username for the Secure Shell account. Used for SSH access and to access
the Cisco TelePresence administration interface. Cisco Technical Assistance
Center (TAC) uses secure shell for troubleshooting and debugging. Contact
TAC for further assistance. Default user name is admin.
Maximum field length is 64 characters.
•
Minimum field length is 6 characters.
•
Tip Usernames and passwords can contain upper and lower case
alphanumeric characters and the underscore and dash characters.
User names cannot start with a - (dash) or _ (underscore) and cannot
use the following names: apache, daemon, nobody, operator, or
shutdown.
Supports CLI Multiple Level Access (MLA).
Note
Yes Password for the SSH account to be used for SSH access and to access the
Cisco TelePresence Web Administration interface. Default password is cisco.
Maximum field length is 64 characters.
•
Minimum field length is 6 characters.
•
OL-21851-01