Cisco CTS-500 Configuration Manual page 135

Appendix A MIBs, RFCs, and SNMP Trap Messages for the Cisco TelePresence System
Table A-3 Peripheral Status (continued)
Notification
ctpPeripheralDeviceCategory—
Designates a device category.
ctpPeripheralDeviceNumber—
Specifies a device number for a
peripheral.
ctpPeripheralStatus—
General information about a single
peripheral
OL-21851-01
Return Values
unknown (0)—Unknown Device
•
other (1)—None of the listed device
•
uplinkDevice (2)—Device attached to CTS uplink port
•
• ipPhone (3)—IP phone
camera (4)—Camera
•
• display (5)—Display
• secCodec (6)—CTS secondary codec
• docCamera (7)—Document camera
• projector (8)—Projector
• dviDevice (9)—Device attached to DVI port
• presentationCodec (10)—CTS codec process presentation stream
auxiliaryControlUnit (11)—Auxiliary control unit
•
audioExpansionUnit (12)—Audio expansion unit
•
microphone (13)—Microphone
•
headset (14)— Headset
•
positionMic (15)—Position microphone
•
digitalMediaSystem (16)—Digitial Media System
•
auxHDMIOuputDevice (17)—Auxiliary HDMI output device
•
—
• noError (0)—Expected peripheral device is functioning through the attached
port.
• other (1)—None of the states listed.
• cableError (2)—Expected peripheral device has a cabling issue.
• powerError (3)—Expected peripheral device has a power issue.
• mgmtSysConfigError (4)—Expected peripheral device has a communications
management system configuration issue.
• systemError (5)—Cisco Telepresence system error.
• deviceError (6)—Expected peripheral device is attached but is not fully
functional.
• linkError (7)—Expected peripheral device has a port level link issue.
Example
CISCO-TELEPRESENCE-MIB::ctpPeripheralDescription.1 = STRING: UP_LINK
CISCO-TELEPRESENCE-MIB::ctpPeripheralDescription.7 = STRING: AUX_CAM --
CISCO-TELEPRESENCE-MIB::ctpPeripheralStatus.1 = INTEGER: noError(0)
CISCO-TELEPRESENCE-MIB::ctpPeripheralStatus.7 = INTEGER: cableError(2)
CISCO-TELEPRESENCE-MIB::ctpPeripheralStatus.13 = INTEGER: other(1)
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Peripheral Status Messages
A-5