Configuring The Phone Security Profile; Sip Phone Security Profile Information - Cisco CTS-500 Configuration Manual

Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Step 4 From the Phone Security Profile Type drop-down menu, choose the phone type.
Click Next.
Step 5
From the Select the phone security profile protocol drop-down menu, choose SIP.
Step 6
Click Next. The Phone Security Profile Configuration window appears containing your Product Type
Step 7
and Device Protocol selections.
Proceed to
Step 8
Profile Configuration page.

Configuring the Phone Security Profile

Before You Begin
In the Phone Security Profile Configuration window, verify your Product Type and Device Protocol
settings:
•
•
Procedure
Proceed to the following configuration tasks:
•
•
•

SIP Phone Security Profile Information

If you selected SIP as the device protocol, follow these steps:
Step 1 From the Cisco Unified CM Administration interface, Choose System > Security Profile and click
Phone Security Profile.
Step 2 Search for a Phone Security Profile using the search features or follow the steps in
Security Profile for
Step 3 Enter configuration information on the Phone Security Profile Information page using the information
in Table 1-12
Click the Save button to save your settings.
Step 4
OL-21851-01
Configuring the Phone Security Profile
Phone Type—Cisco 7970 or Cisco 7975
Device Protocol—SIP
SIP Phone Security Profile Information, page 1-27
Phone Security Profile CAPF Information, page 1-29
Parameters Used in Phone Field, page 1-30
CTS.
as a guide.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Configuring Phone Security Profile Information
to complete the remaining tasks on the Phone Security
Adding a New Phone
1-27