Cisco CTS-500 Configuration Manual page 69

Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets
For CTS Release 1.6 and Earlier
Table 2-5 External Data Location Settings for CTS Release 1.6 and Earlier
Required
Field Non-MIDlets
Information —
Directory
Messages
Services Yes
Authentication Yes
Server
Proxy Server —
Idle Yes
Idle Timer (seconds) Yes—1
Secure —
Authentication URL
Secure Directory —
URL
Secure Idle URL —
Secure Information —
URL
Secure Message —
URL
Secure Services URL —
For CTS Release 1.7 and Later
Note CTS Release 1.7 and later releases require MIDlets.
OL-21851-01
Required for
MIDlets Setting
Yes Leave blank to use the default.
No http://server:8080/IPaddress/getservicesmenu.jsp
No http://server:8080/authenticate.html
— Leave blank to use the default.
No Leave blank to use the default.
— For MIDlets, you do not have to supply a value in the Idle Timer
field. Or you can enter 0 (zero).
Yes (CUCM http://server:8080/authenticate.html
Release 8.0 only)
Yes (CUCM Leave blank to use the default.
Release 8.0 only)
Yes (CUCM Leave blank to use the default.
Release 8.0 only)
Yes (CUCM Leave blank to use the default.
Release 8.0 only)
Yes (CUCM Leave blank to use the default.
Release 8.0 only)
Yes (CUCM http://server:8080/IPaddress/getservicesmenu.jsp
Release 8.0 only)
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Configuring the Cisco Unified IP Phone
2-9