Configuring A Cisco Telepresence Device; Device Information - Cisco CTS-500 Configuration Manual

Configuration guide for the cisco telepresence system
Table of Contents

Advertisement

Configuring a Cisco TelePresence Device

Configuring a Cisco TelePresence Device
You must restart your system after you have completed the configuration tasks in this section. See
Note
Your Settings
To configure a Cisco TelePresence device, perform the tasks in this section. When you are finished
configuring your settings, click Save and follow the prompts to restart the system.
Before You Begin
In the Phone Configuration window, verify that the Phone Type and Device Protocol lists contain the
following information:
Procedure
The following sections describe how to configure Cisco TelePresence devices and associated parameters:

Device Information

To configure device information, enter information into the fields using the information in
a guide. Click Save to save your settings.
Table 1-1
Device Information Window
Field
Registration
IP Address
Active Load ID
MAC Address
Description
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
1-6
Chapter 1
for more information.
Phone Type—Cisco 7970 or Cisco 7975
Device Protocol—SIP
Device Information, page 1-6
Protocol Specific Information, page 1-8
Certification Authority Proxy Function (CAPF) Information, page 1-9
MLPP Information, page 1-10
Product Specific Configuration Layout, page 1-10
Saving Your Settings, page 1-26
Required?
Setting
Read-only. Indicates whether the system is Registered with Cisco Unified
Communications Manager and lists the registered Cisco Unified CM address.
Cisco Unified IP Phone IP Address. Click on the address to see information for that
phone in a new window.
View-only field showing the status of the active load.
Note
Available on the Cisco Unified IP Phone but not available on the CTS.
Yes
MAC address for the Cisco TelePresence primary codec.
Short description of the device.
Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Saving
Table 1-1
as
OL-21851-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unified communications manager

Table of Contents