Optional Hardware - Cisco CTS-500 Configuration Manual

Configuring a Cisco TelePresence Device
Table 1-4 Product Specific Configuration Layout (continued)
Field
A/V Expansion Box
Auxiliary Control Unit

Optional Hardware

Click the appropriate check boxes if the following optional hardware devices are installed:
•
•
•
Note This parameter must correctly reflect how your system is configured. Any discrepancy will cause the
CTS to function improperly. See the
find the default values for your system.

Some check boxes will not appear for some device types. The CTS 1100 and the CTS 1300 use the
Auxiliary Control Unit by default, for example, so these boxes are automatically checked.
See the
and maintaining optional hardware.
Figure 1-2
Configuration Layout window:
•
•
•
•
•
•
•
•
•
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
1-16
Chapter 1
Required? Description
— Box is un-checked by default.
— Box is un-checked by default.
Presentation Codec
A/V Expansion Box (audio/video extension unit)
Auxiliary Control Unit
Cisco TelePresence Hardware Options and Upgrade Guide
and Figure 1-3 show additional features that you can manage from the Product Specific
Auxiliary Control Unit, page 1-18
Dial Plan Information, page 1-18
Directory Number, page 1-19
Global Location, page 1-19
Secure Shell Information, page 1-20
External CTS Log Destination, page 1-21
SNMP Configuration Parameters, page 1-23
SNMP Trap Receive Parameters, page 1-25
Managing SNMP MIBs and SNMP Traps, page 1-26
Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
"Product Specific Configuration Layout" section on page 1-10
for more information about installing
OL-21851-01
to