Cisco CTS-500 Configuration Manual page 131

MIBs, RFCs, and SNMP Trap Messages for the
Cisco TelePresence System
Revised: September, 2010, OL-21851-01
Use the information in this Appendix with the
Note
a Cisco TelePresence Device" section on page
Contents
This chapter contains the following information:
•
•
•
•
•
•
•
•
•
CTS SNMP Trap Message Matrix
Turning on a specific MIB enables an SNMP trap.
that are supported by the Cisco TelePresence System (CTS). SNMP MIB files can be found in the
following directories:
•
•
Note For every MIB.my in the v2 directory, there is an SNMP version 1 MIB-V1SMI.my in the v1 directory.
OL-21851-01
CTS SNMP Trap Message Matrix, page A-1
Configuration Management Messages, page A-3
Peripheral Status Messages, page A-4
Event History Messages, page A-8
Trap Notification Messages, page A-9
Cisco TelePresence Call (CTPC) MIBs, page A-9
Supported Call States MIBs, page A-20
SNMP Objects Value Persistence, page A-21
SNMP Special Characters, page A-22
SNMP version 1 MIB files are in the v1 directory.
SNMP version 2 MIB files are in the v2 directory.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
A P P E N D I X
SNMP Configuration Parameters
1-6.
Table A-1 lists MIBs, RFCs, and SNMP trap messages
A
section of "Configuring
A-1