Cisco CTS-500 Configuration Manual page 42

Configuring a Cisco TelePresence Device
Enter external CTS log address information into the fields using the information in
Click Save to save your settings.
Table 1-9 Cisco TelePresence External CTS Log Destination Settings
Field
External CTS Log Address
Protocol
External CTS Log User Name
External CTS Log User Password
Log Period
Log Start Time
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
1-22
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Required? Setting
— Configures the external CTS logging address. If populated, when CTS logs
are generated, a copy of the logs will be sent to this address using the selected
protocol. You may append a destination path to the address of the remote
machine.
Address format can be either:
host
•
or
host:port
•
Host is either a hostname or IP address (up to 60 characters long). Port is a
number between 0 and 65535. Default is 514.
Yes Selects the protocol to be used to transfer the CTS logs to the Logging
Destination. Choose from the following:
SCP (default)
•
• SFTP
• FTP
— Configures the external CTS logging user name.
Maximum length: 64
— Configures the external CTS logging user password. Password is write only.
Maximum length: 64
Yes The frequency with which the system will automatically generate external
CTS log information. Choose from the following:
Never (default)
•
• Once per Day
Once per 3 Days
•
• Once per Week
— Indicates the time of day the TelePresence will generate logs. The value
should be in a 24 hour format. Where 00:00 is the beginning of the day and
23:59 is the end of the day. Leaving this field blank will turn off the automatic
logging function.
Maximum length: 5
Table 1-8 as a guide.
OL-21851-01