Product Specific Configuration Layout Help - Cisco CTS-500 Configuration Manual

Product Specific Configuration Layout Help

Revised: October, 2010, OL-13677-05
Contents
Table C-1
Cisco Unified Communications Manager Administration interface. To access this information from the
administration interface, click the question mark icon (online help) located at the top of the
Specific Configuration Layout
Table C-1 Product Specific Configuration Fields
Field Required? Default
Disable
Yes
Speakerphone
Disable
Yes
Speakerphone and
Headset
Forwarding Delay
Yes
PC Port
Yes
OL-13677-05
contains detailed information about the Product Specific Configuration fields in the
box.
Description
False Disable only the speakerphone functionality. Disabling speakerphone
functionality will not affect the headset. You can use lines and speed dials with
headset/handset.
False Disable all speakerphone functions and headset microphone.
Disabled Indicates whether the internal switch begins forwarding packets between the
PC port and switched port on your phone when your phone becomes active.
When forwarding delay is set to disabled, the internal switch begins
forwarding packets immediately. When forwarding delay is set to enabled, the
internal switch waits 8 seconds before forwarding packets between the PC port
and the SW port. You should set Forwarding Delay to enabled when you
connect both ports to switches for redundant uplinks or when you daisy chain
phones together.
Enabled Indicates whether the PC port on the phone is enabled or disabled. The port
labeled "10/100 PC" on the back of the phone connects a PC or workstation to
the phone so they can share a single network connection.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
A P P E N D I X
C
Product
C-1