Cisco CTS-500 Configuration Manual page 33

Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Table 1-4 Product Specific Configuration Layout (continued)
Field
Days Display Not Active
Display On Time
Display On Duration
Presentation Input Device
Presentation Output Device Yes
OL-21851-01
Required? Description
— Specifies the days of the week that the Cisco TelePresence system display remains
off by default. Choices are Monday through Sunday. Default is Sunday
To select multiple days, hold down the Control key.
This feature is only available on Cisco Unified CM 5.1.2 and later releases.
Note
— Specifies the time of day that the Cisco TelePresence system display(s) will remain
on after being turned on. Enter a value using a 24-hour format where 00:00 indicates
12:00 midnight and 23:59 indicates 11:59 pm.
Default is 07:30. Maximum number of days allowed: 5.
If you clear the default value so that the field is blank, the display(s) will
Note
turn off after the completion of each call.
— Specifies the length of time the Cisco TelePresence system display(s) will remain
on if a "Display On Time" value is defined. Enter a value using a 24-hour format,
where 1:30 indicates one hour and thirty minutes. The maximum value is 24:00 (24
hours).
Default is 10:30. Maximum number of days allowed: 5.
Note If you clear the default value so that the field is blank, then the display will
turn off at 11:59 pm.

The time set in this field affects how the lights operate on the CTS 500. See
the Light field description below.
Yes Indicates whether you have a presentation input device. Choices are:
• None (default)
• Document Camera
Note This parameter must correctly reflect how your system is configured. Any
discrepancy will cause CTS to function improperly.
Indicates if you have a presentation output device. Choices are:
• None (default)
• Projector/Display
Note This parameter must correctly reflect how your system is configured. Any
discrepancy will cause CTS to function improperly.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
1-13