Cisco CTS-500 Configuration Manual page 73

Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets
Table 2-10
Field
Span to PC Port
Logging Display
Load Server
Recording Tone
Recording Tone Local Volume
Recording Tone Remote Volume
Recording Tone Duration
Display On When Incoming Call
RTCP
more Softkey Timer
Auto Call Select
Log Server
Advertise G.722 Codec
Wideband Headset UI Control
Wideband Headset
Peer Firmware Sharing
Cisco Discovery Protocol (CDP):
Switch Port
Cisco Discovery Protocol (CDP):
PC Port
Link Layer Discovery Protocol -
Media Endpoint Discover
(LLDP-MED): Switch Port
Link Layer Discovery Protocol
(LLDP): PC Port
LLDP Asset ID
LLDP Power Priority
Wireless Headset Hookswitch
Control
IPv6 Load Server
IPv6 Log Server
802.1x Authentication
Detect Unified CM Connection
Failure
Minimum Ring Volume
HTTPS Server
OL-21851-01
Product Specific Configuration Layout Fields
Required?
Yes
Yes
—
Yes
Yes
Yes
—
Yes
Yes
—
Yes
—
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
Yes
Yes
—
—
—
Yes
Yes
—
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Configuring the Cisco Unified IP Phone
Setting
Disabled.
PC Controlled.
Leave field blank.
Disabled.
Leave default setting.
Leave default setting.
Leave field blank.
Disabled.
Disabled.
Leave default setting.
Enabled.
Leave field blank.
Use System Default.
Enabled.
Enabled.
Disabled.
Enabled.
Enabled.
Enabled.
Enabled.
Leave field blank.
Leave the default setting.
Disabled.
Leave blank.
Leave blank.
User Controlled.
Leave the default setting (Normal).
0-Silent.
Additional drop-down menu choices:
• 2 through 15.
HTTP and HTTPS Enabled
2-13