Dismissing Calls; Concurrent Feature Support; Related Self View Feature Information; Conference Control Protocol (Ccp) Vpn Security Solution - Cisco CTS-500 Configuration Manual

Conference Control Protocol (CCP) VPN Security Solution

Dismissing Calls

You can dismiss calls while in Self View mode without disrupting the Self View video and active
presentation. When a call is dismissed, you are taken back to the Self View page.
If you have voicemail configured in Cisco Unified CM, the incoming call alert is not issued because the
Note
call goes directly to voicemail.

Concurrent Feature Support

The
Auto Collaborate

Related Self View Feature Information

See the
System Phone
Conference Control Protocol (CCP) VPN Security Solution
This feature allows an administrative domain that is hosting a Business-to-Business (B2B) conference
to configure its Cisco TelePresence Multipoint Switch (CTMS) using a specific URL structure. This
URL structure allows the
across one or more service provider (SP) HTTP proxies to reach the correct CTMS.
In the CCP
static (fixed path) configuration file to the Cisco Unified Communications Manager (Cisco Unified
CM). When the CTS joins a CTMS meeting, it attempts to route
file. All
traffic is routed to the HTTP proxy.
You can verify configuration status by checking the system status messages for your system and by
checking the configuration using command-line interface (CLI) commands. When configuration is
complete, the Meeting Control button is active on the CTS Cisco Unified IP phone.
Note This feature is only active if the enterprise configuration file on the Cisco Unified Communications
Manager TFTP server is configured. If there is no TFTP configuration file present on the system,
conference control uses the

This feature cannot be configured while in an active Cisco TelePresence call.

See the
information about configuring the TFTP enterprise configuration file.

Related CCP VPN Feature Information

For more information, see the following documentation on Cisco.com:
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
5-6
Auto Collaborate feature is supported while you are in Self View mode. You can plug in to the
VGA cable and see your local content on the projector or data display.
Cisco Unified Communications Manager MIDlets Feature Guide for the Cisco TelePresence
for more information about the Self View feature.
CCP
VPN model (fixed path)
CCP HTTP traffic then attempts to go to the local CTMS. If no local CTMS matches, packet
Internet model (free
"Uploading Files to the Cisco Unified CM TFTP Directory" section on page 2-14
HTTP traffic of participating CTS
solution, the Administrator configures the enterprise by adding a
path).
Chapter 5 Configuring MIDlets-Enabled Features
endpoints to be routed hop by hop
CCP traffic based on this configuration
for
OL-21851-01