C H A P T E R 4 Setting Up And Managing Network Configuration; About Network Configuration - Cisco 2509 - Router - EN User Manual

About Network Configuration

About Network Configuration
User Guide for Cisco Secure ACS for Windows Server
4-2
The appearance of the opening page you see when you click Network
Configuration differs according to the network configuration selections you made
in the Interface Configuration section. The four tables that may appear in the
Network Configuration section are as follows:
• AAA Clients—This table lists each AAA client that is configured on the
network, together with its IP address and associated protocol.
If you are using network device groups (NDGs), this table does not appear on
the initial page, but is accessed through the Network Device Group table. For
more information about this interface configuration, see
page 3-4.
• AAA Servers—This table lists each AAA server that is configured on the
network together with its IP address and associated type.
If you are using NDGs, this table does not appear on the initial page, but is
accessed through the Network Device Groups table. For more information
about this interface configuration, see
Network Device Groups—This table lists the name of each NDG that has
•
been configured, and the number of AAA clients and AAA servers assigned
to each NDG. If you are using NDGs, the AAA Clients table and AAA
Servers table do not appear on the opening page. To configure a AAA client
or AAA server, you must click the name of the NDG to which the device is
assigned. If the newly configured device is not assigned to an NDG, it belongs
to the (Not Assigned) group.
This table appears only when you have configured the interface to use NDGs.
For more information about this interface configuration, see
Options, page 3-4.
Proxy Distribution Table—You can use the Proxy Distribution Table to
•
configure proxy capabilities including "domain" stripping. For more
information, see Proxy Distribution Table Configuration, page
This table appears only when you have configured the interface to enable
Distributed Systems Settings. For more information about this interface
configuration, see
Chapter 4 Setting Up and Managing Network Configuration
Advanced Options, page
Advanced Options, page
Advanced Options,
3-4.
Advanced
4-32.
3-4.
78-14696-01, Version 3.1