Setting Up An Ethernet Port - Honeywell MPA1 User Manual

6 |
MPA1 User Guide

Setting Up an Ethernet Port

There are two options for connecting the panel to a PC via a web server:
•
•
To set up an Ethernet Port
1.
www.honeywell.com/security
Note
1) The panel that you are connecting to the computer is the Primary panel.
The panel is set as Primary panel using the Device Utility App.
2) When creating a user in MPA1 -> Web server, the administrator should
obtain and maintain the consent.
Using a hub/LAN connection
Using a direct connection
Connect your computer's Ethernet port to the panel's Ethernet port using one of the
following two methods:
a. Ethernet Hub connection: Connect both the computer's Ethernet port and the
panel's Ethernet port to an Ethernet hub with standard Ethernet patch cables.
b. Web server direct connection: Connect the computer's Ethernet port directly to
the panel's Ethernet port with either a crossover or an Ethernet cable.
Note UL294 and UL60839-11-1 evaluation consist of the stand alone mode of
this device