Panel Components And Descriptions - Honeywell MPA2 Installation Manual

frequency energy and, if not installed and used in accordance with the
installation and user guides, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
This Class A digital apparatus complies with Canadian ICES-003.
To obtain applicable EU compliance Declaration of Conformities for this
product,
please refer to our website,
http://www.security.honeywell.com/hsce/international/index.html.
For any additional information regarding the compliance of this product to
any
EU-specific requirements, please contact:
Honeywell Security & Communications
Honeywell Security - Quality Assurance Dept., Newhouse Industrial Estate
Motherwell
Lanarkshire ML1 5SB
Scotland
United Kingdom
Tel: +44(0) 1698 738200
Email: UK64Sales@Honeywell.com

2.0 Panel Components and Descriptions

This device complies with part 15 of the FCC Rules. Operation is
Note:
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may
The MPA2 panel consists of a web-browser-enabled controller, a
power-over-Ethernet (PoE) power supply, and a battery (MPA2 Standard
only).
The following figures show the MPA2 panel wiring and components.
MPA2 Access Control Unit Installation Guide, Document 800-25395 - B
Installing the MPA2 Panels
Panel Components and Descriptions
cause undesired operation.
3