Programming Codes - Honeywell Galaxy 3-48C Programming Manual

Galaxy 3 Series Programming Manual

Programming Codes

Each PIN user has access to modify their own PIN. Users do not have access to user codes other than their
own. The only exception to this is the manager code.
1 = User Codes
Enter option 42=Codes and select option 1=User Codes. Press the ent key; details of the first user (User
001) are displayed. The following typical information is displayed on the keypad.
User No
0 0 1 0 0 1 0 0 1
0 0 1 0 0 1
L2.3 L2.3
L2.3 L2.3 L2.3
User Type
Each of the users can be displayed using the A and B keys, or a specific user can be selected by entering the
required user number, for example 023, 069. When the required code is displayed, press the ent key to select
the user codes modification options; 1=Modify PIN is displayed. The available modification options can be
viewed by pressing the A or B keys; press the ent key to select the required option. The options are detailed
in the following paragraphs:
User Name
m m m m m
User User User
User User
A 1234 A 1234
A 1234 A 1234 A 1234
31
42 - Codes (cont'd)
= no pin assigned
= pin assigned
max card/tag/fob assigned
Group mode