Off-Hook Call Announce - Toshiba Perfecptione Installation And Maintenance Manual

INSTALLATION INSTRUCTIONS
SECTION 200-255-204
FEBRUARY 1992
6.12 Loosen the four captive screws securing the
digital telephone' s base, and remove the base
(Figure 4-43).
6.13 Using a cutter, remove the handset hanger
from the base. Insert the handset hanger in the slot
provided on the front of the telephone (Figure 4-
44). The hanger fits in the notch on the handset.
6.14 Rotate the mounting base 180" and secure to
the telephone with the four captive screws (Figure
4-45).
6.15 Connect the electronic telephone to the wall
modular connector with a short cord (approximately
3 inch length). Route the cord into the hollow
portion of the base, then mount the digital telephone
on the wall mounting connector. Test each digital
telephone using the 7TRM Program, Section 200-
255-300, /=rogramming.
6.20 Off-hook Call Announce
6.21 The Off-hook Call Announce (OCA) feature
enables a digital telephone to originate and receive
HANDSET
HANGER
I
PLASTIC
TAB
I-IbUKt 4-4Y-HtMUVAL Ul-
DIGITAL TELEPHONE BASE
FIGURE 4-44-REMOVAL OF HANDSET HANGER
MOUNTING BASE FOR WALL-MOUNT INSTALLATION
voice announcement when the station' s handset is
off-hook. Standard telephones can originate off-
hook call announces, however, it cannot receive
them. A station user is allowed or denied the ability
to originate the Off-hook Call Announce feature in
the DCOS Program. In order to receive the Off-
hook Call Announce feature, a PCB (DVSU) is
required to be installed in each affected digital
FIGURE 4-45-INSTALLATION OF
4-34