Table of Contents
Advertisement
PROGRAMMINGPROCEDURES
SECTlON200-255-310
FEBRUARY1992
TABLE10-2
Miscellaneous Parameters Table
Load the
DTOL Utility Program.
When the TYPE prompt
is received,
proceed
as follows:
NOTES:
I.
2.
3.
4.
5.
This entry is coupled
with the HAC entry in the PAR table in Least Cost Routing
(DLCl).
Data that
is entered
here will also appear
in that table.
Informs
the system if interchangeable
codes are used (office codes with NO/lx
format).
SPCC 1 & 2 entries are the DN of any specialized
common
carrier (SPCC) used (MCI, Sprint, etc.)
or Equal Access Number
(10XxX).
Data that is entered here will also appear in the SMDR (DMDR
Program),
but will not appear
in the SMDR output.
This represents
the number
of d&its in the authorization
codes
that are used with SPCCl
or
SPCC2.
Data that is entered
here will not appear
in the SMDR output.
= ignore line entered.
= Backspace.
= Stop printing
and return to REQ.
= Exit program.
10-3
Advertisement
Chapters
Table of Contents
