Toshiba Perfecptione Installation And Maintenance Manual page 240

2. Print Speed Dial List Data Block (Table 14-2)
2.01 To use the Print Speed Dial List Data Block
(PSDL Program):
l
Perform the Authorization Procedure (Level 1,2,
or 3).
Enter: PSDL (in response to the OK prompt).
l
When the REQ prompt is received after the
program is loaded:
Enter one of the following commands:
ALL-All of the Speed Dial lists will be output.
SYST-System Speed Dial list will be output.
LSTXX-Station Speed Dial list XX will be output.
PROGRAMMINGPROCEDURES
SECTION 200-255-314
FEBRUARY1992
NOTE:
There are 50 Station Speed Dial Lists (LSTOI
- LST50), each of which may have up to ten
numbers (0 - 9).
The output format is as follows:
REQ LSTOG
LNO 06
SDC
LOO2
SDU LO03 LO10
STR 00 9*7147305000
01 9*9142731750
02 NONE
03 '(
09 rr
TABLE14-2
Procedure - Print Speed Dial List Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM
PROMPT
OK
PSDL
USER ENTRY NOTE
- DISK LOADING -
REQ
1
- EXECUTE -
I I
REQ
I 1.
NOTES:
1. The following responses are possible:
ALL =
SYST =
LSTXX =
2. - =
.
c
a
=
: m:
Outputs all Speed Dial List Data Blocks.
Outputs System Speed Dial List Data Block.
Outputs Station Speed Dial List XX Data Blocks.
Ignore line entered.
Backspace.
Stop printing
and
return to REQ.
Exit program.
Error Codes
Error Code
ERPST 00
Program Name: Print Speed Dial List (PSDL)
Meaning
The list number is out of ranae (0 - 50 is available).