Print Paging Group Data Block (Table 7-7) - Toshiba Perfecptione Installation And Maintenance Manual

7. Print Paging Group Data Block (Table 7-7)
7.01
To use the Print Paging Group Data Block
(PPAG Program):
l
Perform the Authorization Procedure (Level 1,2,
or 3).
Enter: PPAG (in response to the OK prompt).
l
After the program has loaded and the REQ
prompt has been received, enter one of the
following commands:
PROGRAMMING PROCEDURES
SECTION 200-255-307
FEBRUARY 1992
PAG
N-All electronic/digital telephone ports be-
longing to the indicated paging group N will be
output in the order in which they were pro-
grammed, in the format shown below (for paging
group 00):
PAGING GROUP 00 LNNX LNNX LNNX
PAGALL-All
assigned paging groups and their
electronic telephone members will be output in
the order in which they were programmed.
TABLE 7-7
Procedure - Print Paging Group Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM PROMPT USER ENTRY NOTE
OK PPAG
- DISK LOADING -
-Q
1
- EXECUTE -
REQ
1
NOTES:
1. The following responses are possible:
PAGN =
PAGALL =
Outputs all electronic/digital telephone ports belonging to the indicated paging group
N in the order in which they were programmed.
Outputs all electronic/digital. telephone ports belonging to the assigned paging
groups in the order in which they were programmed,
/snore line entered.
Backspace.
Stop printing and return to REQ.
Exit program.
. .
7-21