Table of Contents
Advertisement
PROGRAMMINGPROCEDURES
SECTION 200-255-306
FEBRUARY1992
3. Class of Service Data Block (Table 6-3)
3.01
The Class
of Service
Data
Block
(DCOS
Program)
defines
the 16 Classes
of Service that
are available
in the system.
All features
that are
controlled
by the COS are allowed
(except
as
indicated
in notes 3 - 10) to all stations unless they
are restricted
in this Data Block.
3.02
The
DCOS Program
assigns a number
(0 -
15) to each group of restrictions
to be used. The
number defined here is then entered
in response
to
the COS prompt
in the
DSlT, DEKT,
and
DTGP
Programs.
Any numbers
that are not entered
or
are otherwise
defined
will have no COS restric-
tions. Data is entered
as follows:
REQ (Request)-Indicates
that the program
has
loaded. The only response
possible
is CHG.
COS (Class
of Service)--Defines
the COS num-
ber (0 - 15) and the restrictions
to be associated
with it. The possible
restrictions
are listed in
Table 6-3a.
Enter: COS number,
followed
by the restric-
tion(s),
in the following
format:
3 TOO
OVR ACO.
NOTES:
1. In this example,
COS 3 will not allow
access
to Trunk Group 00, the Override
feature,
or the Attendant
Control Override
fea We.
2. If Lodging/Health
Care features
are to be
allowed
in the COS, the code HRM must
be entered.
The result of this entry is the
opposite
of other
COS entries,
since
it
allows
rather than denies feature
opera-
tion.
COS-Repeat
for all COS entries.
TABLE 6-3
Procedure - Class of Service Data Block
Authorization
Procedure
must be completed.
If an OK response
is received,
proceed
as follows:
ITEM
PROMPT
USER ENTRY
OK
DCOS
- DISK LOADING -
NOTE
I
I
REQ
I
CHG
I
cos
0 AAA BBB etc.
l-10
cos
1
AAA BBB
etc.
11
cos
Ia!
12
r
I REQ
I
Repeat prowam
if necessary
I
(con timed)
NOTES:
1. Enter a list of all features
which are not allowed fo this group.
See Table 6-3a for a list of features
and codes.
2. Default
= All features
allowed.
3. lfLodging/Health
Care features are to be allowed in this COS, the code HRM must be entered.
This
entry enables
rather than denies these features.
4. If the initiation
of Off-hook
Call Announce
(OCA) by a station is to be allowed,
the code OCA must
be entered
in the Class Of Service (COS). This entry enables
rather than denies the OCA feature.
5. If a station is to be required
to enter Forced Account
Codes,
the code FAC must be entered
in the
COS. This entry enables
rather than denies this feature.
6-6
Advertisement
Chapters
Table of Contents
