Print Dss Console - Toshiba Perfecptione Installation And Maintenance Manual

9. Print DSS Console Data Block (Table 7-9)
PORCNNX (or PORLNNX)-All CNNX (or LNNX)
data will be output.
9.01 To use the Print DSS Console Data Block
(PDSS Program):
l
Perform the Authorization Procedure (Level 1,2,
or 3).
PORVAC-A list of all unassigned ports will be
output.
Enter: PDSS (in response to the OK prompt).
STACNNX (or STALNNX)-All data regarding the
l
After the program has loaded and the REQ station that is associated with the DSS console
prompt is received: (installed at either CNNX or LNNX) will be output.
Enter one of the following commands:
PORALL-All DSS console Data Blocks will be
output in numerical order of ports (lowest.first).
DSSNN-All DSS console switched DN assign-
ments (#NN = the last two digits of station num-
bers) will be output.
PROGRAMMINGPROCEDURES
SECTION 200-255-307
FEBRUARY1992
TABLE7-9
Procedure - Print DSS Console Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM PROMPT
OK
PDSS
- DISK LOADING -
=Q
- EXECUTE -
USER ENTRY
NOTE
1
I
REP
1
I
NOTES:
1. The folio wing responses are possible:
PORALL = Outputs all DSS console Data Blocks in numerical order of ports (lowest first).
PORCNNX (or PORLNNX) = Outputs all CNNX (or LNNX) data.
PORVAC = Outputs a list of all unassigned ports (COO/CO1 slots only).
STACNNX (or STALNNX) = Outputs allstation data that is associated with CNNX DSS consoles
(or LNNX DSS consoles).
DSSNN = Outputs all DSS console switched DN assignments (#NN = lower two digits of station
numbers).
= Ignore line entered.
= Backspace.
= Stop printing and return to REQ.
= Exit program.
7-29