Toshiba Perfecptione Installation And Maintenance Manual page 195

PROGRAMMINGPROCEDURES
SECTlON200-255-309
FEBRUARY1992
TABLE 9-4
Procedure - Print Trunk Data Block
Authorization Procedure must be completed. If OK response is received, proceed as follows:
ITEM PROMPT
OK
PTRK
- DISK LOADING -
USER ENTRY
NOTE
REQ
1
- EXECUTE -
REQ
1
NOTES:
1. The following responses are possible:
PORALL = Outputs Trunk Data Blocks in numerical order of ports (lowest first).
PORNNX = Outputs Trunk Data Block of Port NNX.
PORVAC = Outputs all unassigned trunk pot-is.
TGPNN = Outputs all Trunk Data Blocks assigned to trunk group NN.
COT
= Outputs all CO Trunk Data Blocks.
FEX = Outputs all FX Trunk Data Blocks.
WAT = Outputs all WATS Trunk Data Blocks.
TIE = Outputs all TIE Trunk Data Blocks.
DID = Outputs all DID Trunk Data Blocks.
CSA = Outputs all CCSA Trunk Data Blocks.
PVL = Outputs all PVL Trunk Data Blocks.
NIT = Outputs the Night Station Assignments for all CO, FX, and WATS trunks.
UPN
= Outputs the Universal Port Number Assignments for trunks above T15.
Ignore line entered.
Backspace.
Stop printing and return to REQ.
Exit program.
Error Codes
Program Name: Print Trunk Data Block IPTRK)
Error Code
ERPTR 00 Invalid response.
Meaning
ERPTR 01 The PCB number or circuit number is out of range (REQ = PORNNX).
ERPTR 02
The input trunk group is out of range (REQ = TGPNN).
1 ERPTR 03 1 The inDut ~ort is not assianed to a trunk (REQ = PORVAC).
9-15