Modify Digits Table Printout; Ptol (Par) Printout - Toshiba Perfecptione Installation And Maintenance Manual

PERCEPTION,,,,
LCRflR PROGRAMMING GUIDE
MARCH 1991
PLCR
REQ
MDT1
TN001
DLT
NONE +---jI-secondpause.1
ADD
*1
REQ
MDT3
TN003
DLT NONE
ADD "17300000"387654
:
REQ
NOTE:
Modify Digits Table Printout
PLCR (MDT1 AND MDT3)
A 1 -second pause is usually required when using Loop Start
trunks, to allow the CO line enough time to attach a receiving
register. This is usually not required for Ground Start trunks.
COD
OK PTOL
REQ
PAR
HAC
714
+ - - - - - - - -
ICC 'N
These parameters are the same as in DL C I/PA R.
SPCCl
730-0000
SPCC2
NONE
1
+---- These parameters are the same as in DMDR.
DDP
1
AUTHl
o 5 .- _ _ _ _ _ _ _ _ _ _ Absorbs the S-digit authorization code, and
AUTH2 NONE
prevents it from being printed (SMDR).
REQ
PTOL (PAR) Printout
-13-