Table of Contents
Advertisement
PROGRAMMINGPROCEDURES
SECTlON200-255-312
FEBRUARY1992
NOTES:
TABLE12-5(continued)
1.
2.
3.
4.
5.
6.
7.
8.
9.
OUT = Will clear all Route
Tables. NN OUT = Will clear Route Table NN.
Route
definition
-
maximum
is six routes,
Format
is: XX
= Trunk Group Number
(0 - 15).
MM = Modify Digits Table to be applied (1 - 12). Modify Digits Table
must
be entered.
Existing Route Schedule
data is printed automatically
after the response
to RT6prompt
is entered.
Time-of-day
interval for this routing
schedule.
Maximum
combinedentries
for LC3, LC2, LCl are sixroutes.
Do notassign
the same route tomore
than one c/ass.
.
Entry required
for schedule
B end time only. Schedule A end time has definedschedule
B start time.
No entry required.
Schedule
A start time has defined the schedule
C end time and schedule
B end
time has defined
the schedule
C start time.
LC3, LC2, and LCI are used in DCOS Data Block to define Station Class of Service. The access
permitted
to each class is as follows:
LCl = All routes defined
for LCl,
LC2, LC3.
LC2 = Routes defined
for LCZ, LC3.
LC3 = Routes defined
for LC3 on/v.
Ignore line entered,
Backspace.
Stop printing
and return to REC.
Exit program.
12-9
Advertisement
Chapters
Table of Contents
