Print System Data Block 2 (Table 5-5) - Toshiba Perfecptione Installation And Maintenance Manual

PROGRAMMING PROCEDURES
SECTION 200-255-305
FEBRUARY 1992
Enter: PRT.
5. Print System Data Block 2 (Table 5-5)
5.01 To use the Print System Data Block 2 (PSYS
Program):
l
Perform the Authorization Procedure (Level 1,2,
or 3).
Enter: PSY2 (in response to the OK prompt).
l
When the REQ prompt is received after the
program is loaded:
l
The System Data Block 2 will be output in the
same format as it was input in the DSDP Pro-
gram.
l
REQ will be prompted again once the printout is
complete.
Enter: p w
q
(to exit the program).
TABLE 5-5
Procedure - Print System Data Block 2
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM PROMPT USER ENTRY
NOTE
OK
.PSY2
- DISK LOADING -
=Q
PRT
1
- EXECUTE -
REQ
1
NOTES:
1.
2.
The on/y response possible is: PRT = Outputs System Data Block 2.
5-13