Toshiba Perfecptione Installation And Maintenance Manual page 246

PROGRAMMINGPROCEDURES
SECTION 200-255-316
FEBRUARY1992
2. Print Alphanumeric Message Data Block
program is loaded:
(Table 16-2)
Enter: One of the following commands:
2.01 To use the Print Alphanumeric Message Data
ALL-The system will output all messages in the
Block (PMSG Program): system (0 - 9).
l
Perform the Authorization Procedure (Level 1,2,
or 3).
MSGX-Message X will be output.
Enter: PMSG (in response to the OK prompt).
x=0-9.
l
When the REQ prompt is received after the
TABLE16-2
Procedure -
Print Alphanumeric Message Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM PROMPT
OK PMSG
- DISK LOADING -
USER ENTRY
NOTE
I I I
REQ
I 1 I
NOTES:
1. The following responses are possible:
ALL = Outputs all messages.
MSG X = Outputs message X.
Ignore line entered,
Backspace.
Stop printing and return to REQ.
Exit program.
16-2