Toll Restriction; Data Block - Toshiba Perfecptione Installation And Maintenance Manual

CHAPTER 10
TOLL RESTRICTION DATA
1. Toll Restriction Data Block (Tables 1 O-l - 1 O-4)
1.01 The Toll Restriction Data Block (DTOL Pro-
gram) defines the office codes and area codes to
be allowed or denied by the Toll Restriction feature.
1.02 There are ten classes of Toll Restriction for
defining a station's outward dialing privileges. Of
these ten classes, eight may be customized (0 - 7),
one restricts the dialing of numbers containing 0 or
1 as the first or second digit (8), and one applies no
restrictions (NONE). The privileges of each station
may be tailored to meet the customer's needs.
Each class includes specific restrictions, one area
code table, and one off ice code table. For conven-
ience, the tables may be defined as either allow or
deny tables.
1.03 When specific off ice codes are to be allowed
or denied within a specified area code, 32 area/
office code tables are available as exceptions to the
area code tables. Data is entered as follows:
PROGRAMMING PROCEDURES
SECTION 200-255-310
FEBRUARY 1992
REQ (Request)-Indicates that the program has
loaded. The only response possible is CHG.
TYPE (Sub-program Type)-There are three sub-
programs within the DTOL Program. Select one
of the following three possible responses:
PAR (Miscellaneous Parameters Table-Table
lo-2)-Defines system operating parameters.
CLS (Restriction Class Table-Table 1 O-3)-
Defines each class of Toll Restriction that may
be customized (classes 0 - 7).
AOC (Area/Off ice Code Exception TableTable
lo-4)-Defines exceptions to the dialing allow-
ances that are defined in the CLS area code
table.
1.04 Each sub-program can be entered indepen-
dently with one of the above responses to the TYPE
prompt. After enterin the desired sub-program,
press the return key &I '). The prompts
associated
with each sub-program will then be issued sequen-
tially.
TABLE IO-1
Procedure - Toll Restriction Data Block
Authorization Procedure must be completed. If an OK resoonse is received, oroceed as follows:
ITEM PROMPT
USER ENTRY NOTE
OK
DTOL
- DISK LOADING -
I I
REQ CHG
TYPE
PAR. CL8 AOC
1
NOTES:
1. Possible entries are:
PAR = Miscellaneous
Parameters Table (1 O-2).
CLS = Restriction Class Table (10-3).
AOC = Area/Office Code Exception fable (10-4).
10-l