4-2 Recommended Cables
To perform thermocouple input, connect a thermocouple element to the terminals. When the wiring distance is long
or when connecting the thermocouple without the element to the terminals, connect via shielded compensating lead
wires.
• For I/O other than thermocouple, use JCS4364 instrument cable or equivalent
(is commonly called twisted shielded cable for instrument use).
The following cable are recommended:
2-wire
Fujikura Ltd.
3-wire
2-wire
Hitachi Cable
Ltd.
3-wire
• A shielded multicore microphone cord (MVVS) may be used, if electromagnetic
induction is comparatively low.
IPEV-S-0.9mm
1P
2
´
ITEV-S-0.9mm
1T
2
´
KPEV-S-0.9mm
1P
´
2
KTEV-S-0.9mm
1T
´
2
Chapter 4. WIRING
4-3