Autoload; Key Operated Autoload Procedure - Honeywell DCP551 Mark ΙΙ User Manual

Chapter 9. MEMORY CARD OPERATIONS

9-4 Autoload

Insert a memory card, press the LOAD key or use external switch inputs in the READY mode and the normal dis-
play mode to load file number 1 on the memory card as program 1 onto the DCP551.

Key operated autoload procedure

Conditions
Operation and action
HANDLING PRECAUTIONS
9-10
Memory card : Program has been saved to file number 1
PA05
Variable parameter :
Mode : READY mode, normal display mode
Insert a memory card and press the LOAD key.
The DCP551 operates as follows.
AUtO
• " " is displayed in display panel 1 and "
• When program number 1 has been loaded onto the DCP551, program number 1 dis-
appears.
• File number 1 on a memory card is loaded onto the DCP551 as program number 1.
• When a load operation is successful, the "
the normal display mode appears.
Unless the number of a program is selected using external switch inputs, program 1 in
segment 1 is selected.
• If the load operation fails, the "
code is displayed in the message panel.
When an error has occurred, press the DISP key to return to the normal display
mode.
A normal load operation cannot be performed when variable parameter
set to 1. A normal load operation requires that this parameter is set to 0.
set to 1
LOAd
AUtO
" and "
AUtO LOAd
" and "
" is displayed in display panel 1.
LOAd
" indications go off and
" indications stay on and an error
PA05
is