Setting Pid Groups And Output Limiter Group Number Items - Honeywell DCP551 Mark ΙΙ User Manual

Chapter 8. PROGRAM SETUP

Setting PID groups and output limiter group number items

Display
NOTE
HANDLING PRECAUTIONS
8-12
(1) In the set value display state, move to the PID group, output limiter group number
item to be set for the segment on the programming map.
(2) Press the ENTER key to make display panel 1 flash (registration of first setting).
(3) Use the ↑, ↓, ←, and → keys to make the first setting (PID group number).
Setting range: ON-OFF, PID 0 to 9, PID A
(4) Press the ENTER key to stop the flashing on display panel 1 and display panel 2
starts flashing. (Start of second setting)
(Pressing the FUNC and CLR keys causes display panel 1 and 2 to return to unset
Pld 0/otL 0
state "
(5) Use the ↑, ↓, ←, and → keys to make the second setting (output limiter group num-
ber).
Setting range: 0 to 9
(6) Press the ENTER key to stop the flashing on display panel 2.
(Pressing the FUNC and CLR keys causes display panel 2 to return to unset state
Pld 0/otL 0
" " and the flashing stops.)
Set PID group value
Set output limiter
group number value
C O N T R O L
M V O U T L I M I T E R
• Unset values are indicated as "
C21
• When setup data is set to 0 and the programmer function is selected or when
is set to 1, PID groups, output limiter group number items are skipped and not dis-
played.
When a PID group or output limiter group number is not 0 or both are something other
than 0, they use a subfunction. A subfunction cannot be used when a setting has not
Pld 0/otL 0
been made "
• When a set value for a PID group number is 0, it is a sequel to a PID number
in a previous segment. When the set value for a PID group number in the first
segment is 0, the set value is 1.
• When a set value for an output limiter group number is 0, it is a sequel to an
output limiter group number in a previous segment. When the set value for
an output limiter group number in the first segment is 0, the set value is 1.
" and the flashing stops.)
PROG SEG
Program
Segment
number number
PROFILE
Pattern trend
Pld 0/otL 0
".
".
C58