Console; Basic Display Status; Display - Honeywell DCP551 Mark ΙΙ User Manual

Chapter 2. NAMES AND FUNCTIONS OF PARTS

2-2 Console

The console consists of the operation keys, displays and LEDs (light emitting diodes).

■ Basic display status

■ Display

Basic display contents
LED
Display panel 2
(Lower display)
Message display
LCD (16 characters
2-2
Basic display status shows the running condition of the DCP551 on the console.
The basic display status is invoked when the DCP551 is powered up (power on).
Key operations make it possible to change from the basic display status to parameter set-
ting status, program setting status, program copy status, memory card operation status
and general reset status.
Parameter setting status
Program setting status
Key operations can also be used to return to the basic display status.
* : This function is available on the DCP551E***** model only.
Display panel 1
(Upper display)
PV
DEV
OUT
CYC
SP
TM
SYN
¥
2 lines)
●
Basic display contents LED
PV : Lights during PV display, otherwise off.
DEV : Lights during deviation display, otherwise off.
OUT : Lights during output display, otherwise off.
CYC : Lights during cycle display, otherwise off.
SP
: Lights during SP display, otherwise off.
TM : Lights during time display, otherwise off.
SYN : Off
Power on
Basic display status
Program copy status
Program number display
(PROG display)
PROG SEG
PROFILE
RUN AT
HLD BAT
MAN EG1
PRG EG2
ADV
PROG RUN/HOLD DISP
RESET
MESSAGE
MESSAGE
*
Memory card operation status
General reset status
Segment number display
(SEG display)
Profile display
Mode display LED