Setup Data Setting - Honeywell DCP551 Mark ΙΙ User Manual

Setup data setting

No.
Item code
PV1 range number
1
C 01
PV1 temperature unit
2
C 02
PV1 decimal point position
3
C 03
PV1 linear decimal point
4
C 04
position
PV1 linear range lower limit
5
C 05
PV1 linear range upper limit
6
C 06
PV1 cold junction
7
C 07
compensation
PV1 square root extraction
8
C 08
PV1 square root extraction
9
C 09
dropout
PV1 cold junction bias
10
C 10
Factory default
Item
settings
0
0
1
1
0 PVU
10000PVU
0
0
0.2
0.0
Chapter 7. PARAMETER SETUP
User
Settings and descriptions
settings
0 to 16 : t/c
48 to 52 : linear (DC current, DC voltage)
64 to 71 : RTD
96 to 103 : RTD
128 to 134: linear (DC current, DC voltage)
[Description:]
For details see range numbers listed in ÒSection 2-3
Input Type and Range NumberÓ (page 2-8)
0: ¡C Celsius
1: ¡F Fahrenheit
[Description:]
When setting is linear, Ò-----Ó is displayed and
C01
setting cannot be performed.
0 to 2
A setting of 0 means no decimal point and a setting of 1
and 2 indicates the number of decimal digits.
[Description:]
When setting is linear, Ò-----Ó is displayed and
C01
setting cannot be performed.
The setting range varies with the
¥ A setting between 0 and 2 can be made when
set to: 5, 15, 65 to 69, 97 to 101 and
settings: 66, 68, 69, 98, 100, 101 and
C01
to 1.
¥ A setting of 0 and 1 can be made when
0 to 4, 6 to 14, 16, 64, 70, 71, 96, 102, 103 and
set to 0.
settings: 0 to 5, 7, 8, 10, 12 to 14, 16, 64, 65, 67,
C01
70, 71, 96, 97, 99, 102, 103 and
¥ Only a setting of 0 is possible when
11 and is set to 1
C02
When the setting is for a t/c or RTD, this setting is
C01
reflected in PVU (PV1) units.
0 to 4
A setting of 0 means no decimal point and a setting between 1
and 4 indicates the number of decimal digits.
[Description:]
C01 settings for t/c and RTD display Ò-----Ó and setting cannot
be performed.
When setting is linear, this setting is reflected in PVU
C01
(PV1) units.
Ð19999 to +20000 PVU (PV1)
[Description:]
settings for t/c and RTD display Ò-----Ó and setting cannot
C01
be performed.
Reversing the lower limit and upper limit makes it possible to
reverse analog inputs and specified values.
0: Provided (compensated internally)
1: Not provided (compensated externally)
[Description:]
settings for t/c and RTD display Ò-----Ó and setting cannot
C01
be performed.
0: Not provided
1: Provided
[Description:]
settings for t/c and RTD display Ò-----Ó and setting cannot
C01
be performed.
0.2 to 10.0% (ratio depends on input range)
[Description:]
settings for t/c and RTD display Ò-----Ó and setting cannot
C01
be performed.
Ð1.0 to +1.0¡C
[Description:]
settings for t/c and RTD display Ò-----Ó and setting cannot
C01
be performed.
Use 0.0 for normal settings.
and setting.
C01 C02
is
C01
is set to 0.
C02
is set
C02
is set to:
C01
is
C02
is set to 1.
C02
is set to: 6, 9,
C01
7-21