Drive Plate Removal And Installation - Honda Accord 2008 Manual

07/11/02 09:19:22 61TA0000_140_0271

Drive Plate Removal and Installation

1. Remove the transmission assembly (see page
14-243).
2. Remove the drive plate (A) and the washer (B) from
the engine.
＊０１
3. Install the drive plate and the washer on the engine,
and tighten the eight bolts in a crisscross pattern in
at least two steps.
4. Install the transmission assembly (see page 14-255).
ＴＡ０８ＡＥＢＥ１０４１０４２２２５１ＫＤＡＴ００
A
B
12 x 1.0 mm
74 N·m (7.5 kgf·m, 54 lbf·ft)
14-269