Clutch Inspection - Honda Accord 2008 Manual

07/11/02 09:23:27 61TA0000_140_0363

Clutch Inspection

1. Inspect the clutch pistons and the clutch piston
check valves (A).
＊０１
2. If the clutch piston check valve is loose or damaged,
replace the clutch piston.
3. Check the spring retainer for wear and damage.
4. If the spring retainer is worn or damaged, replace it.
5. Check the oil seal (A) on the spring retainer of the
1st, 2nd, and 3rd clutches for wear, damaged, and
peeling.
＊０２
A
6. If the oil seal is worn, damaged, or peeling, replace
the spring retainer.
A
7. Inspect the clutch discs, the clutch plates, and the
clutch end plate for wear, damage, and
discoloration.
Clutch Discs for All Models
Standard Thickness: 1.94 mm (0.076 in.)
Clutch Plates
Standard Thickness:
1st Clutch Wave-plates: 1.6 mm (0.063 in.)
Flat-plates:
2nd Clutch Wave-plates: 2.0 mm (0.079 in.)
Flat-plate:
3rd Clutch Wave-plates: 1.6 mm (0.063 in.)
Flat-plates:
4th Clutch (wave-plates):
5th Clutch (wave-plates):
8. If the clutch discs are worn or damaged, replace
them as a set. If the clutch discs are replaced,
inspect the clearance between the clutch end-plate
and the top disc.
9. If any plate is worn, damaged, or discolored,
replace the damaged plate with a new plate, and
inspect the other wave-plates for a phase
difference. If the clutch plate is replaced, inspect
the clearance between the clutch end-plate and the
top disc.
10. If the clutch end plate is worn, damaged, or
discolored, inspect the clearance between the
clutch end-plate and the top disc, then replace the
clutch end plate.
ＴＡ０８ＡＥＢＥ１０４１１３１００４１ＭＡＡＴ００
1.6 mm (0.063 in.)
2.0 mm (0.079 in.)
1.6 mm (0.063 in.)
2.0 mm (0.079 in.)
2.0 mm (0.079 in.)
14-361