Countershaft Reverse Selector Hub And 3Rd Gear Removal - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:22:50 61TA0000_140_0349

Countershaft Reverse Selector Hub and 3rd Gear Removal

1. Install a commercially available bearing separator

on 4th gear (A). Set a press on the countershaft (B)

with a spacer (C) between the press and the

countershaft, and remove the reverse selector hub

NOTE: Some reverse selector hubs are not press-

fitted, and can be removed without using the

bearing separator and a press.

2. Remove the needle bearing, the set ring, the

35 x 47 x 7.8 mm collar, and the cotters.

3. Set the press on the countershaft (A) with a spacer

(B) between the press and the countershaft, and

remove 3rd gear (C).

4. Remove the 37 x 41 x 54.3 mm collar, 5th gear, 1st

gear, and 2nd gear.

ＴＡ０８ＡＥＢＥ１０４１０９１７４５１ＫＡＡＴ５０

Table of Contents