Honda Accord 2008 Manual page 924

07/11/02 08:47:43 61TA0000_140_0081
15. Measure the voltage between transmission range
switch connector terminals No. 7 and No. 10.
＊０４
TRANSMISSION RANGE SWITCH CONNECTOR
Is there more than 5 V ?
YES
−
NO
16. Turn the ignition switch to LOCK (0).
17. Jump the SCS line with the HDS.
18. Disconnect PCM connector B (49P).
ATP R (WHT) GND (BLK)
Wire side of female terminals
− Go to step 20.
Go to step 16.
19. Check for continuity between PCM connector
terminal B15 and body ground.
PCM CONNECTOR B (49P)
ATP R (WHT)
Terminal side of female terminals
Is there continuity?
YES − Repair short to body ground in the wire
between PCM connector terminal B15 and the
transmission range switch, then go to step 50.
NO − Go to step 57.
＊０５
(cont'd)
14-79