Differential Thrust Clearance Adjustment - Honda Accord 2008 Manual

07/11/02 09:25:38 61TA0000_130_0068
M/T Differential

Differential Thrust Clearance Adjustment

Special Tools Required
Driver, 40 mm I.D. 07746-0030100
1. If you removed the 80 mm shim from the
transmission housing, reinstall the same sized
shim.
＊０１
2. Install the differential assembly into the clutch
housing.
＊０２
13-68
3. Install the transmission housing onto the clutch
housing, then tighten the 8 mm flange bolts in a
crisscross pattern in several steps (see step 16 on
page 13-59).
Specified Torque: 8 x 1.25 mm
27 N·m (2.8 kgf·m, 20 Ibf·ft)
4. Use the 40 mm I.D. driver to bottom the differential
assembly in the clutch housing.
00746-0030100
5. Measure clearance between 80 mm shim and the
bearing outer race in the transmission housing.
− −
Standard: 0 0.10 mm (0 0.0039 in.)
ＴＡ０８ＡＡ７Ｅ３４１５０７０００００ＭＢＡＴ００
＊０３
＊０４