About The Signal Configuration Page - Honeywell Experion PKS User Manual

Attention
•
•
•
5. Click Apply.
6. Click OK to close the Address Management page.
7. Click OK to close the Field Network Configuration tab.

6.6.7 About the Signal Configuration page

After you have configured the slave devices in the master, you can view the device details such as the slot
number, device type, tag name, data type, and so on from the Signal Configuration page.
The following figure displays a sample Signal Configuration page.
Defragmentation does not change the offsets of slaves for which these offsets are locked.
For a complete defragmentation, you must unlock all locked slaves.
Defragmentation does not remove reserved memory areas.
6 PROTOCOL BLOCK
85