PDC Type
Numeric Input for Communication module - 2 channels
This is used internally by DSB and it cannot be connected to PIOMB.
Numeric Output for Communication module - 2 channels
This is used internally by DSB and it cannot be connected to PIOMB or
operated using Control Builder. This must be configured always.
Digital Output (Relay Outputs) - 2 channels
Digital Output with data invalid setting (Relay Outputs) - 4 channels
Digital Output with data invalid setting - 8 channels
Analog Output - 1 channel
Analog Output - 4 channels
7.7.2 Functions of CEAGDSB
Function
•
Integrates the PROFIBUS DP slave devices to Experion.
•
Reads data from field devices and writes output into field devices depending on whether the I/O module is
an input module or an output module.
•
Processes extended diagnostic data and updates channel status and send notification based on the channel
status.
•
Receives data from PIOMB and sends it to the device, if the PDC is connected to a PIOMB.
•
Updates the PDC states.
Data Processing
See "Data processing" on page 118.
7 DEVICE SUPPORT BLOCK (DSB)
Supported CEAG modules
•
LB8106
•
FB8206
•
LB8106
•
FB8206
•
LB6101
•
FB6301
•
2xxx
•
LB6005
•
FB6305
•
6x1y
•
Digital Outputs
–
LB6X08
–
FB6X08
•
Relay Outputs
–
LB6006
–
FB6306
•
LB4101
•
FB4201
•
LB4102
•
LB4002
•
FB4202
•
FB4302
•
LB4104
•
LB4105
•
LB4005
•
FB4204
•
FB4205
•
FB4305
131