Honeywell Experion PKS User Manual page 128

7 DEVICE SUPPORT BLOCK (DSB)
You can configure alarms that correspond to an input PDC and a given byte/bit offset within that PDC. When
the specific bit becomes "On," an alarm is raised.
You can configure up to 16 alarms. However, you cannot configure the severity or the priority for these alarms.
All alarms are reported with priority as "High" and Severity as "0."
Tip
There are no other alarms specific to the DRIVEDSB other than these user-configurable alarms.
128 www.honeywell.com