Honeywell Experion PKS User Manual page 52

5 PROFIBUS GATEWAY MODULE (PGM) BLOCK
Redundancy tab
The Redundancy tab detail display provides the redundancy history details. You can also view the complete
configuration details of the PGM block from the Config Details link provided in the Redundancy history
section.
When you click the Config Details link, the Main tab of the PGM block configuration form appears. You can
click the Redundancy tab in the configuration form to view the redundancy parameters.
You can perform the following functions from the PGM Redundancy tab detail display.
• Disable Synchronization.
• Enable Synchronization.
• Become Primary.
• Initiate Switchover.
Tip
These parameters appear as push buttons in the detail display.
Attention
For a non-redundant PGM, the text "Non Redundant" appears in the Redundancy tab detail display.
Soft failure tab
The Soft failures tab detail display provides information on the soft fails that have occurred in the PGM block.
If there is a soft fail, the corresponding LED in the detail display appears red.
Note that you cannot modify any values from the Soft Failures tab detail display.
52 www.honeywell.com