Monitoring Pgm Block; Pgm Block State After Configuration And Load; Pgm Block Status Parameters; Pgm Block Command Parameters - Honeywell Experion PKS User Manual

5 PROFIBUS GATEWAY MODULE (PGM) BLOCK

5.5 Monitoring PGM block

Tip
In this section, the state and command parameters of the PGM block are listed for quick reference. For detailed
information about these parameters, you need to refer to the PROFIBUS Gateway Module Parameter Reference
guide.
Related topics
"PGM block state after configuration and load" on page 38
"PGM block status parameters" on page 38
"PGM block command parameters" on page 38
"PGM memory statistics parameters" on page 38
"PGM block icons" on page 40
"PGM block diagnostic alarms" on page 40

5.5.1 PGM block state after configuration and load

After the PGM block is loaded, the Platform State (BCMSTATE) must be OK.

5.5.2 PGM block status parameters

PGM State (BCMSTATE)
The BCMSTATE parameter displays the PGM platform state.
Redundant Synchronization State (RDNSYNCSTATE)
The RDNSYNCSTATE parameter displays the current synchronization state of the PGM.
Redundancy Role (RDNROLESTATE)
The RDNROLESTATE parameter indicates whether the module is operating as a primary, secondary, or
logically non-redundant PGM.

5.5.3 PGM block command parameters

PGM Command (BCMCOMMAND)
The BCMCOMMAND parameter displays the PGM platform command. In the PGM this command can
assumes one value, "SHUTDOWN."
Enable Shutdown (ENABLESHUTDOWN)
The ENABLESHUTDOWN command can use used to shutdown the PGM with the configured slave devices
that are on control.

5.5.4 PGM memory statistics parameters

The Memory tab is included in the PGM block's configuration form that displays the memory statistics
information of the PGM block.
38 www.honeywell.com