Siemens Et200M Device Support Block (Siemens Et200M Dsb); I/O Modules Supported By The Siemens Et200M Dsb - Honeywell Experion PKS User Manual

7 DEVICE SUPPORT BLOCK (DSB)

7.9 Siemens ET200M Device Support Block (Siemens ET200M DSB)

The Siemens ET200M DSB runs on the PGM and represents one Siemens device in the PROFIBUS network.
The Siemens ET200M DSB processes the raw data from the Siemens devices and converts it to the PDC format
supported by the Experion. The Siemens ET200M DSB communicates with the master PGM for data
conversion.
A single Siemens ET200M DSB can support up to 16 input/output modules.
The Siemens ET200M DSB has 9 card physical slots. The first slot is for the station and the remaining eight
slots are for the I/O modules. Logically, the ET200M I/O rack is divided in to 11 logical slots. The first 3 slots
are reserved and the remaining slot 4 through slot 11 are for the I/O modules. The extended diagnostics for the
ET200M has diagnostic data for the modules in I/O rack slots. It also contains the channel-specific diagnostics
for channels of modules in the I/O rack slots.
The following table summarizes the I/O modules supported by the Siemens ET200M DSB and also the number
of channels supported by these I/O modules.
I/O module
Siemens analog input module
Siemens analog output modules
Siemens digital input module
Siemens digital output module
Set of mixed digital input and output module
Supported gateways
The Siemens ET200M DSB supports following gateways.
• IM 153-1
• IM 153-2
Related topics
"Device Support Block (DSB) overview" on page 112
"CEAG Device Support Block (CEAGDSB)" on page 129
"Generic Drive Device Support Block (DRIVEDSB)" on page 124
"Generic Device Support Blocks (GENPADSB and GENPAGWDSB) for PA devices" on page 122
"Siemens AS-i Link Device Support Block (Siemens DP/AS-i-Link DSB)" on page 134
"Turck Excom Device Support Block (Turck Excom DSB)" on page 142
"Generic Device Support Blocks (GENDSB and GENIODSB)" on page 120

7.9.1 I/O modules supported by the Siemens ET200M DSB

The following tables lists the I/O modules supported by the Siemens ET200M DSB.
Siemens ET200M DSB
Digital Module
Digital Input Module SM 321; DI 32_24 VDC
Digital Input Module SM 321; DI 32_120 VAC
Digital Input Module SM 321; DI 16_24 VDC
138 www.honeywell.com
Number of channels supported
8, 4, 2
8, 4, 2
32, 16, 8, 4
32, 16, 8, 4
-
Order Number
(6ES7 321-1BLx0-0AA0)
(6ES7 321-1EL00-0AA0)
(6ES7 321-1BHx2-0AA0)