12 PROFIBUS GATEWAY MODULE (PGM) MAINTENANCE
12.1 Periodic checks
The following table identifies checks that you should perform periodically (every 3 to 6 months) to keep the
PGM in good working condition.
Check...
That all segments of the 4-character display and the light
emitting diodes (LED) on PGM are working.
That all connections are secure.
That cable insulation is not worn or cracked.
That IOTA is secure.
244
www.honeywell.com
Possible Corrective Action...
If segment or LED is not lit or has dimmed, you must replace
the PGM since front-panel indicators and LEDs are not field
replaceable.
Secure connections, as needed.
Replace cables, as required.
Tighten mounting screws.