Honeywell Experion PKS User Manual page 235

41 Double-click the PBDICHANNEL.
42 Select the PIOMB (PIOMB_2239) from the Module Name list.
Select Profibus I/O Module Block from the Module Type list.
43
The channel numbers and the channel name appear under the Module Type field. The number of channels
that will appear is 4 (0, 1, 2, 3) as it is defined in the PDC tab of the GENDSB.
Select channel number "1" to be assigned to the CM.
44
45 Click Assign Channel Block.
The channel that is associated to the CM will appear in the Currently Assigned Channels area in the Main
tab of the PIOMB block.
Repeat steps 40 through 45 to assign another PROFIBUS channel to the CM.
46
Click OK.
47
Related topics
"Using Profibus Network Configuration Tool for configuring field network devices" on page 61
10 PROFIBUS GATEWAY MODULE (PGM) CONFIGURATION EXAMPLE
235