Configuring A Secondary - Honeywell Experion PKS User Manual

5 PROFIBUS GATEWAY MODULE (PGM) BLOCK
5.3 Configuring a secondary PGM
When a PGM is configured as redundant, the secondary PGM block is added to the Project view automatically.
Perform the following steps to configure a secondary PGM
1 In the Project view, right-click the secondary PGM block icon and select Module Properties.
The secondary PGM configuration form appears.
2 In the Tag Name box, type the name of the secondary PGM block (a maximum of 16 characters) or accept
the default.
In the Item Name box, type the item name.
3
4 Use the online help as a guide to complete the configuration entries on all other tabs.
5 Click OK.
36 www.honeywell.com