Protocol Block Station Displays; Detail Displays And Faceplate Names; Calling Up The Displays; Detail Display Tabs - Honeywell Experion PKS User Manual

6.13 Protocol Block station displays

Related topics
"Detail displays and faceplate names" on page 105
"Calling up the displays" on page 105
"Detail display tabs" on page 105

6.13.1 Detail displays and faceplate names

The following table lists the names of the details display and faceplate of the Protocol Block.
Tab Name
Main tab
Status tab
Field Network Status tab
Configuration Details tab

6.13.2 Calling up the displays

The following table lists the actions that you must perform to call up the Protocol Block detail displays.
To call the Protocol Block...
Main tab display
Slave Status tab display
Field Network Status tab display Click the Field Network Status tab.
Config Details tab display

6.13.3 Detail display tabs

Main tab
The Main tab detail display provides information such as the name of the point detail display, group detail
display, and the faceplate.
Detail Display
sysdtlPBLINKa.htm
sysdtlPBLINKb.htm
sysdtlPBLINKc.htm
sysdtlPBLINKd.htm
Then ...
Type the PBLINK point name (for example PBLINK_132) in the Station command zone
and press F12.
You can also click the Search
click OK.
Click the Slave Status tab.
Click the Config Details tab.
Faceplate
ssysdtlPBLINKa_fp.htm
icon in the Station toolbar and type the point name and
6 PROTOCOL BLOCK
105